Leather Belt Loops
Product Description
These custom made belt loops feature your choice of 1.5", 1.75", or 2" belt loops. The hole spacing for mounting the clips is .75" on center, which makes them a perfect fit for most of our Omega™ Series holsters. Please measure your hole spacing to verify fit before ordering.
Designed for Outside the Waistband carry for your Omega Series IWB or OWB holster.
These OWB belt loops are not compatible with Omega™ holsters with the optional magazine/light carrier attached. You will need to remove your magazine/light carrier to install these belt loops.
*These belt loops are Sold As A Set (Right & Left) with mounting hardware. These belt loops are custom made to order and have a lead time to produce.
Specs:
Designed for Outside the Waistband Carry
Daul layer leather, glued and stitched together (unless you select Black with No Stitching)
Your choice of color (leather and thread)
Your choice of belt size (1.5", 1.75", or 2")
0.75" On Center
Made in Parker, CO USARETURN AND REFUND POLICY
We apologize, but due to the nature of our business, all sales of accessories, parts, and replacement products are final. We do however guarantee the product(s) will be free of defects. If you experience an issue with your accessories, parts, or replacement products, please contact Customer Service.
Mounting Instructions
Omega™ series holsters can be converted from IWB to OWB and vice versa. To mount your OWB clips to your Omega™ holsters, follow the steps below.
1. If setup for IWB, we suggest removing the IWB clips first. You will need a #2 Phillips head screw driver to remove the screws holding on the IWB clips on the top (Kydex) side of the holster.
2. If you originally ordered an IWB model of the Omega™ holster, locate the spare hardware that shipped with your holster. You will need to use the .500" screws to replace the 1-1.25" screws on the slide side IWB clip mount points. Use the .500" screws and original finishing washers to secure the Kydex and spacers to the leather backer.
3. Your OWB clips shipped with mounting hardware. Looking at the back side of your holster, the OWB clips can be mounted to any of screw posts visible on the back side using the supplied .250" screws.
4. Using the top mounting locations on each side of the holster for your OWB clips will result in a 10-15 degree forward cant.
5. You can change the ride height and cant by mounting the clips to different (higher/lower) mounting points.
6. Secure the screws using hand pressure. If you notice the screws loosening over time, you can apply a small amount of blue or purple Loctite to the screw tips. Clear fingernail polish will also work.
7. Make sure to store your IWB clip hardware in a safe place so you can convert your holster back to IWB, as desired.
